HULKFIT · 40 products
HULKFIT Home Gym Equipment: Racks, Bars and Weight Plates
Power cages, barbells, plates and dumbbells sized for a garage or a spare room.
Four pieces to start a home gym
HULKFIT Elite Series 3x3 Power Cage
Elite Series 3x3 Power Cage, 1200 lb total capacity
Check price on AmazonHULKFIT 7-Foot Olympic Barbell, 700 lb Capacity
7-foot, 45 lb Olympic barbell rated to 700 lb
Check price on AmazonHULKFIT Pro Series 45 lb Red Bumper Plate
Pro Series 45 lb red bumper plate with a 2-inch collar
Check price on Amazon
HULKFIT 120 lb Rubber Hex Dumbbell Set
120 lb rubber hex dumbbell set: 10, 20 and 30 lb pairs
Check price on AmazonHULKFIT power cages and squat racks
Seven frames carry the heavy work: full cages rated from 800 to 1200 lb, a wall-mounted rack that folds to under a foot deep, and a squat stand with two pull up bars. Choose the frame before anything else, because upright size decides which attachments in the next group will fit. The Elite Series cage stands 82 inches tall, so a low basement ceiling points toward the other frames.
HULKFIT Elite Series 3x3 Power Cage
Light commercial 3 x 3 inch cage with a roomy walk-in space for barbell training.
- Total weight capacity 1200 lb
- 49 x 59 x 82 inch dimensions
- 3 x 3 inch uprights, 1-inch holes
- 11-gauge steel, matte black powder coat
- Pull up bar, safety bars, spotter arms
- Product weight 302 lb
HULKFIT Pro Series Folding Wall-Mounted Power Rack
Fold-away rack for squats and bench press where floor space is tight.
- Total weight capacity 1,000 lbs
- 23 x 42.5 x 86 inches overall
- Folded depth under 1 foot
- 11 gauge powder coated steel
- 2-inch hole spacing, 4 way pin locking
- Product weight 112 lbs
HULKFIT Pro Series 2nd Gen Black Power Cage
Second-generation black power cage with a multi-grip pull up bar for home lifting.
- 800 lb weight capacity
- Steel frame with soldered brackets
- Multi-grip pull up bar
- Upright stabilizer feet
- Bolt-down holes, hardware included
- 2nd Generation design, black
HULKFIT Pro Series Gen 1 Squat Stand
Yellow squat stand with two pull up bars for full-body barbell and bodyweight training.
- 800 lb capacity
- 2 pull up bars and 2 J-hooks
- 2 spotter arms
- 1-inch and 2-inch weight plate holders
- 6 resistance band pegs
- Hardware and instructions included
All cages and racks 7 items
Rack attachments and cable add-ons
Nine add-ons bolt to or hang from a frame already in place: J-hooks, dip bars, a cable pulley kit, a T-bar row handle, lat pulldown handles and a gym storage rack. Unlike the cages, each piece is sized to one upright, so most fit 2.3 to 2.35 inch poles while the horizontal barbell holder fits only the 3 x 3 inch Elite Series cage. Measure one upright of your rack before ordering.
HULKFIT Cable Pulley System with Tricep Rope
Plate-loaded pulley kit that adds cable exercises to a squat stand or power cage.
- Tested capacity 200 lbs
- 1 cable, 1 pulley, 1 tricep rope
- 1 loading pin, 3 carabiners, 2 hanging straps
- Adjustable cable length via U-bolt
- Works with plates, kettlebells or dumbbells
HULKFIT Y-Dip Bar Power Cage Attachment
Steel Y-shaped dip station that mounts on a rack for dips, leg raises and push ups.
- Max weight capacity 300 lbs
- 26 x 22 x 7.8 inch dimensions
- 1.75 inch diameter handle
- Product weight 12 lbs
- All steel, black powder coated finish
- Fits 2.35 x 2.35 inch uprights
HULKFIT Pro Series Resin-Pad J-Hooks Pair
Resin-padded J cups that store a barbell on the rack without marking its knurling.
- 2 J-hooks with resin pad
- Fits 2.3 x 2.3 inch uprights, 1-inch holes
- Pair weight 5.2 lb
- Weight capacity 800 - 1000 lb, rack dependent
- No assembly required
HULKFIT 5-Piece Lat Pulldown Attachment Set
Five rubber-coated cable handles for pulldowns, rows and curls on a home cable machine.
- 5 pieces in one set
- Wide grip lat pulldown bar and rowing bar
- Straight bar, auxiliary handle, curl handle
- Reinforced steel cores, rubber coated handles
- Carabiner connection for pulley systems
- 1-Year Warranty
See every attachment 9 items
Bumper and cast iron weight plates by HULKFIT
All nine plates have a 2-inch center hole, so they load onto Olympic bars and not onto 1-inch standard bars. The group splits into rubber bumpers, color-coded from the 10 lb yellow to the 55 lb purple at a shared 17.75 inch diameter, and enamel coated cast iron plates with built-in handles for plate-only lifts. The iron plates are smaller across: 11.8 inches for the 25 lb and 14.17 inches for the 35 lb.
HULKFIT Pro Series 45 lb Red Bumper Plate
Red 45 lb low-bounce bumper for Olympic lifts and heavy barbell training.
- 1 x 45 lb plate
- 17.75 inch diameter, 2.5 inch thick
- 2-inch collar
- Low bounce high-density rubber
- Color: Red
HULKFIT Pro Series 35 lb Blue Bumper Plate
Blue 35 lb bumper weight plate sized for 2-inch barbells and mid-range loads.
- 1 x 35 lb plate
- 17.75 inch diameter, 2 inch thick
- 2-inch collar
- Low bounce rubber with steel collars
- Color: Blue
HULKFIT 35 lb Cast Iron Grip Plate
Heavier 35 lb enamel iron plate that loads onto 2-inch Olympic style barbells.
- 1 x 2-inch 35 lb plate
- 35 lbs plate: 14.17 x 14.17 x 1.53 in
- Durable enamel coated cast iron
- Ergonomic multi-grip handles
- Model HF-2X35
HULKFIT Sport Series 35 lb Bumper Plate
Single 35 lb rubber bumper plate for 2-inch Olympic barbells and plate-only workouts.
- 1 x 35 lb plate
- 2-inch stainless steel insert
- Recycled high-density rubber and virgin rubber
- Raised edges for solo plate lifting
- Markings in pounds and kilograms
- Model HFBP-35
Compare all plates 9 items
Olympic bars, curl bars and weighted bars
Seven bars cover three jobs: loaded lifts on 7-foot and 5-foot Olympic bars, arm work on a 48-inch EZ curl bar, and foam-padded 20 and 25 lb bars that need no plates at all. For lifting inside a cage, pick the 7-foot bar, since the 5-foot technique bar is too short to rack on the cages and stands in this range. Aluminum clamp collars for 2-inch sleeves sit in this group too.
HULKFIT 7-Foot Olympic Barbell, 700 lb Capacity
Full-length 45 lb steel barbell for squats, bench press and deadlifts with Olympic plates.
- 7-foot, 45 lb Olympic bar
- 700 lb weight capacity
- Steel construction with deeper knurled handles
- Rotating sleeves with bearings
- Fits 2-inch Olympic weight plates
- Black, size 84 inches
HULKFIT 5-Foot Olympic Technique Barbell
Shorter 25 lb technique bar for practising lifts with 2-inch Olympic weight plates.
- 5-foot, 25 lb Olympic bar
- 500 lb weight capacity
- Steel construction with deeper knurled handles
- Rotating sleeves with bearings
- Black, size 60 inches
HULKFIT 48-Inch Olympic EZ Curl Bar
Curved 48-inch curl bar for curls, skullcrushers and high pulls with Olympic plates.
- 48 x 2 inch overall dimensions
- Product weight 25 lb
- Total weight capacity 350 lbs
- 7 x 2 inch sleeves
- Machine grooved steel with brass bearings
- Black zinc plating
HULKFIT 2-Inch Aluminum Barbell Clamp Collars
Quick-release clamps that hold Olympic plates in place on 2-inch bars.
- 2 x 2 inch barbell clamps
- Aluminum construction
- Built-in rubber lining
- Quick-release, lock-open lever
- No assembly required
View all bars 7 items
HULKFIT dumbbells, kettlebells and battle ropes
Eight pieces work without a rack: rubber hex dumbbell pairs at 10, 25 and 30 lb plus a 120 lb set, enamel cast iron kettlebells at 20 and 35 lb, and battle ropes at 30 and 50 feet. This is the line for a room with no cage, or for conditioning between barbell sessions. The 50-foot rope needs 50 ft of clear floor, which makes the 30-foot rope the fit for a smaller room.
HULKFIT 120 lb Rubber Hex Dumbbell Set
Three pairs of rubber hex dumbbells for progressing from lighter to heavier loads.
- 120 lb total set weight
- 1 pair each of 10, 20, 30 lb
- Cast-iron core in high-density rubber
- Hexagonal anti-roll rubber shell
- Textured non-slip handles
- Ships in multiple boxes
HULKFIT 35 lb Cast Iron Kettlebell
Heavier 35 lb kettlebell for squats, deadlifts and conditioning in small spaces.
- 35 lb kettlebell
- Dimensions 5.25 x 8.75 x 9.75 in
- Cast iron with enamel coating
- 1 kettlebell inside
- Model HFCIKB-35
HULKFIT 30-Foot 2-Inch Battle Rope
Thick 30-foot battle rope for endurance and strength work in compact spaces.
- 30 ft length, 2 inch diameter
- 3-strand polyester blend
- Heat-shrink ends for grip
- Rolls up for storage
- Model HFBR-3020
HULKFIT 30 lb Pair Rubber Hex Dumbbells
Heavier 30 lb hex dumbbell pair whose flat heads resist rolling on the floor.
- 30 lb pair
- Cast iron core
- Chrome finish contoured handles
- Hexagon shaped dumbbell heads
- 2 year warranty
See the free weights 8 items
What sets HULKFIT equipment apart
Steel frames rated in four figures
The Elite Series 3x3 cage is 11-gauge steel in a matte black powder coat with a total weight capacity of 1200 lb, and the frame alone weighs 302 lb. The Pro Series folding rack uses 11 gauge powder coated steel as well and carries 1,000 lbs. At that frame weight, assemble the cage where it is going to stay.
One collar size across plates and bars
Every bumper and grip plate in the range has a 2-inch collar, and the Olympic bars, EZ curl bar and clamp collars are built around that 2-inch sleeve. Plates bought years apart still slide onto the same bar. The single exception is the 5-foot standard barbell, a 1-inch bar for plates with holes 1 inch or less.
Low-bounce rubber at one diameter
Pro Series bumpers are high-density, low-bounce rubber, and all of them measure 17.75 inches across, so a loaded bar sits at the same height off the floor with 10 lb or 55 lb plates. Thickness is what changes: 0.75 inch for the 10 lb plate, 2 inches for the 35 lb, 2.5 inches for the 45 lb and 3.2 inches for the 55 lb.
Functions added to the rack, not beside it
Instead of a separate machine, the attachments add work to the frame: a plate-loaded cable pulley with a 200 lb tested capacity, a Y-dip bar rated to 300 lbs, a T-bar row handle rated to 180 pounds and resin-pad J-hooks rated 800 to 1000 lb depending on the rack. Each part carries its own limit, and the lowest number in a setup is the one that counts.
Steel, cast iron and rubber: materials and care
Frames and attachments are steel under a powder coat, black on most pieces and yellow on two racks. Kettlebells, grip plates and the hex dumbbell cores are cast iron, sealed in enamel on the bells and plates and encased in rubber on the dumbbells. Bumper plates are rubber throughout: the Sport Series 35 lb plate blends recycled high-density rubber with virgin rubber, and the all-black Sport Series plates are solid virgin rubber.
Care follows the surface. Enamel and powder coat are finishes, so keep iron pieces on a mat or a storage rack instead of stacked against each other. Rubber plates belong on protected flooring, and the Pro Series bumpers are not meant for drops from above bench press height. On the rack, resin-pad J-hooks hold a bar without marking its knurling, and the aluminum clamp collars grip the sleeve through a built-in rubber lining.
Two details catch new owners out. The lightest all-black Sport Series plates bend when used alone, so load them beside a heavier plate. Battle ropes are a 3-strand polyester blend with heat-shrink ends, and they roll up for storage once a session is over.
| Elite Series 3x3 cage | 11-gauge steel, matte black powder coat |
|---|---|
| Folding wall-mounted rack | 11 gauge powder coated steel |
| Pro Series bumper plates | Low bounce high-density rubber, 2-inch collar |
| Sport Series all-black plates | Solid virgin rubber, stainless steel collars |
| Grip plates and kettlebells | Enamel coated cast iron |
| Hex dumbbells | Cast iron core, rubber hex heads, chrome finish handles |
| Olympic barbells | Steel, rotating sleeves with bearings |
| EZ curl bar | Machine grooved steel, brass bearings, black zinc plating |
| Battle ropes | 3-strand polyester blend, heat-shrink ends |
| Clamp collars | Aluminum with built-in rubber lining |
Match the rack to the room first
Cage capacities, frame details and included parts sit side by side in the table at the end of this page.
Compare the cagesWhich setup fits your space
A one-car garage that still parks the car
The Pro Series folding rack measures 23 x 42.5 x 86 inches open and folds to under 1 foot deep, so floor space comes back once the squats, lunges and bench presses are done. Its stringers mount onto wall studs. If the wall has no studs where the rack would go, this frame is off the list.
An apartment with no rack at all
Three pairs of hex dumbbells at 10, 20 and 30 lb cover curls, presses and rows without a frame, and the hexagonal rubber shell keeps them from rolling across the floor. The 120 lb set ships in multiple boxes, which is easier to carry up stairs than one crate.
Conditioning for martial arts training
A 30-foot, 2-inch battle rope gives conditioning work as an alternative to traditional weights, then rolls up and goes in a corner. For strength days, the 35 lb blue bumper on a 2-inch bar covers martial arts strength sessions and general strength training with one plate size.
A garage gym built up one piece at a time
The Gen 1 squat stand is rated to 800 lb and arrives with two pull up bars, two J-hooks, two spotter arms, 1-inch and 2-inch plate holders and six resistance band pegs. Start there with a barbell and weight plates, then add the cable pulley kit later for lat pulldown and tricep rope work, since it attaches to a squat stand or power cage.
About the HULKFIT range
The range covers a whole home or garage gym in five groups: racks, rack attachments, weight plates, bars and free weights. It runs from a 1200 lb power cage down to a 10 lb pair of hex dumbbells, and most pieces connect to each other through the 2-inch Olympic sleeve or a shared upright size.
Two series run through the racks. The Pro Series frames, the 2nd Gen black cage, the folding wall rack and the Gen 1 squat stand, are rated from 800 to 1,000 lb, and most of their attachments fit 2.3 to 2.35 inch uprights. The Elite Series 3x3 cage is the larger frame at 49 x 59 x 82 inches, with its own horizontal barbell holder.
The collection suits people who strength train at home and want barbell, bodyweight and cable work from one frame. It works well as a sequence rather than a single order: a stand or cage, a 7-foot bar, a few plates, then attachments and weight storage as training changes. With floor space only for dumbbells, the free-weight group stands on its own.
Fit, contents and care questions
Which attachments fit the Elite Series 3x3 cage?
Do standard 1-inch plates fit the Olympic bars?
How high can bumper plates be dropped from?
What comes with the yellow 1200 lb power cage?
Will the 5-foot technique bar rack on a HULKFIT power cage?
Which pieces carry a warranty?
HULKFIT racks compared side by side
Capacity, frame and included parts for each cage and stand, so the frame is settled before the plates.
| HULKFIT | Type | Weight capacity | Build detail | Included | Check price on Amazon |
|---|---|---|---|---|---|
| HULKFIT Elite Series 3x3 Power Cage | Power cage | 1200 lb total | 3 x 3 in uprights, 49 x 59 x 82 in | Pull up bar, safety bars, spotter arms | Check price on Amazon |
| Yellow 1200 lb cage from HULKFIT | Power cage | 1200 lb | 2 x 2 in frame | Pull up bar, 2 dip bars, 2 J-hooks, safety bars or straps | Check price on Amazon |
| HULKFIT folding wall-mounted rack | Wall-mounted rack | 1,000 lbs total | Folds to under 1 ft deep | 4 way pin locking, 2-inch hole spacing | Check price on Amazon |
| 2nd Gen black cage by HULKFIT | Power cage | 800 lb | Upright stabilizer feet, bolt-down holes | Multi-grip pull up bar, hardware | Check price on Amazon |
| HULKFIT Gen 1 squat stand | Squat stand | 800 lb | 1-inch and 2-inch plate holders | 2 pull up bars, 2 J-hooks, 2 spotter arms | Check price on Amazon |
Build the home gym, piece by piece
HULKFIT power cages, rack attachments, weight plates, barbells, dumbbells, kettlebells and battle ropes. Check capacity, size and today’s price on Amazon.